Electro Acupuncture Machine – Electro Acupuncture Device ITO ES 130 Replaces The IC-1107+.

The new ITO ES-130, this model replaces the popular IC-1107+
the ES-130 is a compact, lightweight, sturdy, palmsize, high quality Japanese electro-acupuncture device
Featuring a High/Low switch on the back of the unit, the switch is toggled to Low to facilitate use with needles or to High for MEA electro-therapy

Usually ships in 1-2 business days

The brand new ITO ES-130, this model replaces the preferred IC-1107+. This new model is designed and calibrated to fulfill all very important safety and regulatory industry standards.
Featuring a Prime/Low switch at the back of the unit, the switch is toggled to Low to facilitate use with needles or to Prime for MEA electro-therapy. It offers three independently controlled output channels with adjustable frequency indicated by a flashing light. The waveform is a novel biphasic pulse which has been designed to attenuate electrolysis damage to the needle. The pocket portable ES-130 is the smallest and smartest taking a look professional electro-therapy unit on the earth, to be used in or out of the place of business. This unit isn’t equipped with some extent locator.

Accessories come with 3 sets of latest CE wire leads with rectangular CE jack, wearing case, and directions. Does no longer come with battery.

Converter Jack (sold one after the other) converts rectangular CE jack to 3.5mm jack to be used with all 3.5mm jack accessories.

Note: When the use of 9-volt Duracell Batteries with the ES-130, a skinny shim (or paper) should be placed at the bottom of the battery to make correct contact (ie, Duracell are shorter in length). Also, as a way to use the built-in battery check (situated at the back side of unit), power should be turned on.

Specifications: 500 ohm test load
Output channels 3 independent intensity channels
Frequency L – 1 to 20 Hz
(adjusted with M – 20 to 150 Hz
fine frequency dial) L – 1 to 20 Hz
M – 20 to 150 Hz
H – 150 to 500 Hz
Low volts & current 0 to 10 volts, 0 to 20 milliamps
Hi volts & current 0 to 20 volts, 0 to 40 milliamps
Voltage, max 30 volts (one hundred kohm load)
Pulse width 100 microseconds (µS)
Pulse shape asymmetric biphasic square wave
Pulse mode continuous
Power source one 9 volt battery (no longer included, Energizer brand really helpful)
Freq indicator flashing red light
Size, wt, color 4.5″ x 3.2″ x 1.2″, 0.3 lbs, gray.
The brand new ITO ES-130, this model replaces the preferred IC-1107+
the ES-130 is a compact, lightweight, sturdy, palmsize, prime quality Japanese electro-acupuncture device
Featuring a Prime/Low switch at the back of the unit, the switch is toggled to Low to facilitate use with needles or to Prime for MEA electro-therapy
Three independently controlled output channels with adjustable frequency indicated by a flashing light
The pocket portable ES-130 is the smallest and smartest taking a look professional electro-therapy unit on the earth, to be used in or out of the place of business. This unit isn’t equipped with some extent locator.

Reviews

There are no reviews yet.

Be the first to review “Electro Acupuncture Machine – Electro Acupuncture Device ITO ES 130 Replaces The IC-1107+.”

Your email address will not be published. Required fields are marked *